NCP Coatings is honored to support the men and women of the U.S. Military through direct efforts and global distribution. We offer a full line of DynaSpec™ QPL’d Military Specified Coatings. Following the stringent guidelines of ARL and TACOM, we produce the highest quality military specific products for use on ground support equipment and helicopters.
B-875/ T-63/ T-98 is pretreatment wash primer for use on clean metal surfaces of all types as treatment prior to application of the coatings system and is not intended to be used as a permanent protective coating by itself. This wash primer has excellent spray characteristics and meets TT-C-490E Type III and DOD-P-15328D wash primer specifications.
MIL-C-8514C Wash Primer
N-8564A/B is a Zinc Chromate Acid Etching Wash Primer meeting the stringent requirements of TT-C-490 Type III. MIL-C-8514C, this product is suitable for steel, aluminum and other metal substrates providing superior adhesion and corrosion resistance when used as part of a recommended military or OEM paint system.
A-A-59745 Moisture Cure Zinc Rich Primer
N-5751M2 is a one-component moisture cure zinc rich primer containing 90% zinc dust in the dried film that provides outstanding corrosion protection for military ground and tactical equipment and munitions. N-5751M2 meets the requirements of SSPC 20 Type II and A-A-59745.
A-A-59745 High Solids 90% Zinc Dust Epoxy Primer HAPS Free
N-8669A/B is a three-component, HAPS free, epoxy polyamide, corrosion inhibiting primer suited for high performance applications where extended corrosion resistance is required. The product is lead and chromate free and contains 90% zinc in the dried film. This product meets SSPC 20 Type II and A-A-59745. This product is very well-suited for general industrial applications, including heavy equipment, trailers and trucks where a high performance epoxy
primer is required.
TT-P-1757A Zinc Chromate Primer
XE-7156 is a Zinc Chromate, low-moisture sensitive, Corrosion Inhibiting Primer
designed for application to aluminum that has been surface treated or coated
with MIL-C-8514C or DOD-P-15328D wash primers.
MIL-DTL-53030D 2K Waterborne Epoxy Primer
N-8460A/B a two-component water-reducible epoxy primer for use over pretreated zinc phosphate steel. It is approved to military specification MIL-DTL-53030D Type II.
MIL-DTL-53022E Type II, III, IV Epoxy Primer 3.5 VOC and 2.5 VOC
A two-component, epoxy polyamide, corrosion inhibiting primer suited for high performance application. Lead and chromate free.
MIL-DTL-53039E Solventborne CARC Topcoat Type III, IV, VIII, IX
Aliphatic Polyurethane Single Component CARC, Polymeric Flattened
The MIL-DTL-53039 coatings are HAPS Free, polymeric flattened single component moisture cure aliphatic polyurethane chemical agent resistant coatings (CARC). These coatings can be effectively decontaminated after exposure to chemical warfare agents and provide visual and infrared camouflage to military vehicles and equipment.
MIL-DTL-64159B Waterborne CARC Topcoat Type II
Aliphatic Polyurethane 2k Water Dispersible CARC, Polymeric Flattened
MIL-DTL-64159, Type II CARC coatings are two-component water reducible polyurethane chemical agent resistant coatings (CARC) for military equipment. Can be effectively decontaminated after exposure to chemical and biological warfare agents and prove visual and infrared camouflage to military vehicles and equipment.
MIL-PRF-22750H, Type II, Class H, Grade B Epoxy Topcoat
A two-component, high solids epoxy coating for use on the interior of tactical equipment.
MIL-PRF-14105E High Temperature Heat Resistant
These heat resistant coatings are intended for use on steel surfaces exposed to high temperatures (1400°F) and exterior weathering. They are used primarily on exhaust systems and in under body applications. These coatings are lead and chromate free.
MIL-DTL-11195G & H
Enamel, Lusterless, Fast Dry, VOC Compliant
For use on ammunition and other metals. Exterior and interior applications.
Lead and hexavalent chromium free.