NCP Coatings Naval Products

Ensuring our protective and marine coatings meet the demands and specifications to support the military naval market is important to NCP. Our DynaSpec line of coatings are QPL’d Military Specified Coatings which meet the stringent guidelines required in the defense market.

For Commercial Marine products, click here.

 

Read about NCP’s partnership with the US Navy in the November 2020 CoatingsPro magazine cover story here!

USS Kearsarge Visits Crete

NCP Coatings takes great pride in supporting the men and women of the U.S. Military through direct efforts and global distribution. We offer a full line of DynaSpec® QPL’d Military Specified Coatings. Following the stringent guidelines of NRL and NAVSEA, we produce the highest quality products possible.

2020 U.S. Naval Products Information Sheet

SiloxoGrip®

SiloxoGrip®: Polysiloxane Nonskid & Nonslip Coatings

SiloxoGrip® non-skid and non-slip coating was formulated by the Navy Research Laboratory, and then scaled up and manufactured by NCP Coatings. SiloxoGrip is a step up in industrial polysiloxane coatings, now with better performance, enhanced durability and an extended life cycle.

» Learn more about SiloxoGrip

 

SiloxoShield®: Polysiloxane Top Side Coatings

SiloxoShield polysiloxane top side coatings were formulated by the Navy Research Laboratory and commercialized for industry wide use by NCP Coatings Inc. SiloxoShield coatings have urethane like performance in an isocyanate free formulation far superior to conventionally available polysiloxane on the market today.

» Learn more about SiloxoShield


 

 

Specification

MIL-DTL-24441D, Epoxy Polymide Type III

These epoxy polyamide systems are formulated for immersion service and to protect surfaces from environmental attack. Primary usage: over steel and aluminum in marine and industrial environments where a hard, durable, chemical resistant coating is desired. Typically applied as a two-coat system.

 

MIL-DTL-24441D Epoxy Polymide Type IV

These epoxy polyamide systems are formulated for immersion service and to protect surfaces from environmental attack. They are used over steel and aluminum in marine and industrial environments where a hard, durable, chemical resistant coating is desired.

 

MIL-PRF-24635 Silicone Alkyds (Standard, LRC, LSA and LSA/Non-Stain versions)

This product is available in a full range of colors. It is a co polymerized silicone alkyd enamel designed to protect ship topsides against the sun’s rays and the harsh marine environment. This QPL approved coatings system is available in Standard, LRC (Low Reflective Coating), LSA (Low Solar Absorbency) and LSA/Non-stain versions. Offered in both conventional Type II 340 grams/liter (2.8 VOC) and Type III 250 grams/liter (2.08 VOC) versions.

MIL-PRF-24635 Silicone Alkyd Enamel Type II, Class1

These products are a high gloss copolymerized silicone alkyd enamel to be used on primed, metal, glass reinforced plastic, and plastic/composite surfaces. These products exhibit excellent color and gloss retention.

MIL-PRF-24635 Silicone Alkyd Enamel Type II, Class 2

These products are a semi-gloss copolymerized silicone alkyd enamel for use on primed, metal, glass, reinforced plastic, and plastic/composite surfaces. These products exhibit excellent color and gloss retention.

 

MIL-PRF-24763 Acrylic Emulsion Coatings (Standard and LSA Versions)
MIL-PRF-24763 Acrylic Emulsion Enamel, Type II, Class 2

An acrylic emulsion enamel with exceptional gloss and color retention intended for use on primed metal, particularly on smooth exterior metal.

 

MIL-PRF-24763 Acrylic Emulsion Enamel, Type II, Class III

An acrylic emulsion enamel with exceptional gloss and color retention intended for use on primed metal, particularly smooth exterior metal. These coatings are low reflective and have designed to be highly absorbent in the visible and near IR portion of the electromagnetic spectrum.

 

TT-P-645B Alkyd Primer Navy Formula 84

This is an anticorrosive alkyd primer primarily for use as a general primer for steel and properly prepared aluminum.

 

TT-P-28 High Temperature Aluminum

High heat aluminum is designed for use on superheated steam lines, boiler casings, boiler casings, boiler drums, superheated headers and other applications where resistance to temperatures up to 1200°F is desired.

 

MIL-DTL-15090 Enamel, Equipment, Light Gray (Navy formula #111)

Gray alkyd enamel for interior and exterior shipboard use, 340 gram/liter (2.8 VOC). Meets full specifications for naval and marine coating and paint applications.

 

MIL-PRF-24596 Non-Flame Emulsions (Water Based)

These products are fire retardant, non-intumescent coatings designed for use on interior spaces of surface ships and submarines. This enamel resists spontaneous ignition when heated by conduction through a metal substrate. This enamel does not support combustion.

 

MIL-PRF-24596 with Amendment 1 Fire Retardant Chlorinated Alkyd – Solvent Based

This enamel resists spontaneous ignition when heated by conduction through a metal substrate. The enamel does not support combustion. Complies with Military Specification: MIL-PRF-24596B, Classes 1 & 2, Grade C, Applications A & B.

 

MIL-PRF-24607B with Amendment 2 Chlorinated Alkyd Enamel

A semi-gloss enamel designed primarily for interior industrial marine applications where flame resistance is required.

 

MIL-DTL-24631 Navy Formula 184 Epoxy

An epoxy polyamide system formulated for use in demanding high performance environments. It is a self-priming coating that has outstanding adhesion and good flexibility.

 

MIL-DTL-24631 Navy Formula 187 Urethane

Camouflage paint for submarines, Type II. This two-component polyester urethane coating is a highly flexible, weather resistant topcoat.

 

SiloxoGrip®: MIL-PRF-24667C Type I Comp G

SiloxoGrip® a Siloxane Non-Skid Deck Coating, offering excellent durability, color retention, stain and chemical resistance. SiloxoGrip was designed to offer low solar absorbance, and to be moisture tolerant allowing for broader application windows. These characteristics combine to offer 3 -5 times the life expectancy over conventional non-skid coatings on the market today. SiloxoGrip can be either rolled or spray applied.

 

MIL-PRF-24635 Type V and VI Siloxoshield

Siloxane Coating with excellent durability, color retention and chemical resistance. This product also offers stain resistance, low solar absorbance and is moisture tolerant.